Lead-based coatings still exist in many factories, ships, bridges, and buildings. Old paint releases toxic lead dust during renovation. Workers and the environment face long-term risk.

Many countries set rules for lead removal. The rules differ. The goal is always the same:

• Reduce dust.

• Protect workers.

• Control waste.

• Prevent pollution.

What Is Lead-Based Paint Certification?

Lead-based paint certification is an official qualification. It allows workers to remove or disturb lead paint legally. Certified workers follow standard safety practices.

Different countries use different systems：

One fact stays the same everywhere:
   Lead removal work must control dust and protect personnel.

Why Certification and Safe Removal Matter

Lead exposure causes health problems. Lead dust stays in air and soil for years. Safe removal protects workers and customers. Compliance builds trust and reduces legal risk.

Certified removal provides four benefits:

Health Protection

Workers breathe less dust.

Regulatory Compliance

The job meets national requirements.

Environmental Safety

Waste stays contained and marked.

Better Surface Quality

Users get a clean surface for coating.

Which Taisheng Machine Fits Your Project?

   We do not sell lead certification.
   We provide the machinery that makes certified work easier and safer.
   Our machines process steel structures, pipelines, ships, tanks, industrial equipment, and building surfaces. We use wet blasting, vacuum blasting, and abrasive recovery systems.

Vapor blasting pot

Vapor blasting pots offer several advantages for outdoor and large-scale lead paint removal:

• ① Ideal for Large Structures
  They process pipelines, bridges, ship hulls, tanks, and heavy steel structures that cannot fit inside any cabinet.

• ② Strong Dust Suppression
  Water encapsulates abrasive and lead particles. This reduces airborne contamination by more than 90%.

• ③ High Mobility
  Operators can move the system to the job site. No fixed blasting room is required.

• ④ Lower On-Site Cost
  Users do not need a full blasting room or complex filtration systems for outdoor projects.

• ⑤ Perfect for Renovation and Maintenance
  Most lead removal in industrial facilities happens on-site. Wet blasting pots are the most practical tool for this type of work.

Model	TS-225 (movable)	TS-500 (movable)	TS-800
Picture
Tank Diameter	Ø225mm	Ø500mm	Ø800mm
Tank Height	1250mm	1350mm	1550mm
Tank Volume	55L	140L	330L
Add Water	10gal / 37.85L	20gal / 75.7L	30gal / 113.4L
Add Abrasive	100Lbs / 45.36KG	200Lbs / 90.72KG	300Lbs / 136KG
Continuous Blasting	30mins	60mins	90mins
Weight	~125kg	~190kg	~250kg
Compressed Air Required	185+CFM / 5.24m³/min/6bar	185+CFM / 5.24m³/min/6bar	210+ CFM / 5.95 m³/min/6bar
Blast Gun	1pc, nozzle made by Boron Carbide, nozzle diameter 10mm
Blasting Hose	ID 1”, length 50’
Control Method	Pneumatic Control
Air hose	Blue; DN25
Abrasive Type	sand/glass bead
Warranty	1 year(except the consumable parts)

Wet blasting cabinet

Wet blasting cabinets provide the highest level of dust control for indoor workshops:

• ① Fully Enclosed, Zero-Dust Environment
  The cabinet prevents airborne lead contamination. Operators do not inhale or come into contact with hazardous dust.

• ② High Precision Processing
  Users achieve consistent blasting angles, pressure, and surface finish.
  This is ideal for valves, molds, auto parts, and precision components.

• ③ Best Choice for Batch Production
  The cabinet supports repetitive, stable processing for small and medium-sized parts.

• ④ Clean and Safe Workshop
  The system maintains a clean working area. Lead particles remain inside the cabinet and the filtration system.

• ⑤ Easier International Compliance
  Enclosed blasting helps users meet occupational safety regulations, such as:
             – OSHA (USA)
             – WHS (Australia)
             – EU Workplace Safety Standards
             – MOM (Singapore)

Model	TS9065W	TS1010W	TS1212W
Picture
Operating Zone	900x650x750mm	1000x1000x750mm	1200x1200x750mm
Machine Size	900x950x1700mm	1000x1400x2100mm	1200x1600x2250mm
Entrance Door	480x650mm	830x650mm	1030x650mm
Total Weight	~350kg	~500kg	~600kg
Fabricated Material	Stainless Steel SUS304	Stainless Steel SUS304	Stainless Steel SUS304
Nozzle	1pc, diameter 9.5mm	1pc, diameter 9.5mm	1pc, diameter 9.5mm
Compressed Air	~1.5m³/min at 6bar	~1.5m³/min at 6bar	~1.5m³/min at 6bar
Load Capacity	60kg	60kg	60kg
Machine Lighting	12W x 2	12W x 2	12W x 2
Power Supply	3P/380V 50hz, 1.5kW	3P/380V 50hz, 1.5kW	3P/380V 50hz, 1.5kW
Connection Hose	DN16mm	DN16mm	DN16mm
Abrasives Available:	Glass bead, sand, aluminum oxide, etc.
Warranty:	12 months (excludes normal consumable parts)

Note: our equipment can be designed according to customer special requirements.

Dry Blasting

We recommend Dry Blasting for massive steel structures. This method prioritizes speed. It provides unmatched stripping power.

• The Focus: We design these machines for efficiency. They maximize surface profiling speed.

• Important Note: Dry blasting generates dust. Operators must ensure safety. You must install external containment. You must add filtration systems. This meets local standards.

Lead Paint Removal Cost

Job cost changes with several conditions.

Key Cost Factors：

Traditional scraping and chemical stripping take time. They create dust and fumes.
   Our blasting system reduces time and dust, so your total project cost goes down.

How Our Equipment Supports Global Compliance

You can use our equipment in the USA, Vietnam, Australia, EU, Middle East, South America, and more。

We support compliance through engineering design:

• We reduce airborne lead dust.

• We collect abrasives and paint debris.

• We prepare the surface for repainting.

• We lower environmental impact.

We own ISO and CE certification. These certifications guarantee mechanical safety, quality management, and environmental design. Our machines assist teams who follow local hazardous-material procedures.

FAQ

Q1: Do I need certification to remove lead paint?
   Yes. Most countries require certified procedures or registered workers.

Q2: Can I remove lead paint with sandblasting?
   Yes. You must control dust. Our machines provide dust suppression and recycling.

Q3: How can I protect workers?
   You supply PPE. You follow guidelines. Our blasting systems reduce exposure risk.

Q4: Does your machine help pass environmental inspection?
   Yes. We own ISO and CEcertification. These certifications guarantee machine safety, quality management, and environmental design. They do not certify lead paint removal. Our dust-controlled equipment supports safe and compliant lead removal.

Conclusion

In summary, the process of lead-based paint removal needs to follow various worldwide regulations. All regions need to follow the shared objective of protecting workers and the environment through proper hazardous dust control systems even though they have distinct certification standards.

The success of your project depends on compliance according to Taisheng. The Vapor Blasting Pots from our company offer users high mobility during their work on outdoor infrastructure projects but our Wet Blasting Cabinets operate as contained precision tools for workshop component processing. The technology system operates to minimize airborne pollutants while it achieves peak operational performance. The selection of suitable dust-controlled blasting equipment enables you to fulfill legal requirements and safety standards while achieving long-lasting high-quality surface preparation.